Construction Nail
Nails
Common nails are widely used in the construction sector for formwork and all kinds of woodworking. Alongside 4 cm – 20 cm construction nails, thin and thick construction nails, screw-head nails, countersunk (parabaş) nails and special nails are produced.
They are made on German Wafios N90/N51/N41/N31 machines, with smooth heads rising perpendicularly from the upper surface of the shank and concentric with it. After polishing, the nails are packed in shrink-wrapped carton boxes. Zinc coating can be applied on request for longer service life.
Βασικά χαρακτηριστικά
- For formwork and woodworking
- Length range 4 cm – 20 cm
- Countersunk, flat (parabaş) and screw-head options
- Bright or electro-galvanized finish
Μεγέθη που Διαθέτουμε
Τα μεγέθη που διατηρούμε σε απόθεμα. Εισάγετε ποσότητα για το μέγεθος που χρειάζεστε και προσθέστε το στη λίστα προσφοράς· τα υπόλοιπα μεγέθη κατασκευάζονται κατά παραγγελία.
| Μέγεθος | Μονάδα | Ποσότητα | Προσθήκη στην προσφορά |
|---|---|---|---|
| 2″ (5 cm) — 17x21IMC010.010 | kg | ||
| 2.5″ (6 cm) — 17x27IMC010.015 | kg | ||
| 3″ (7 cm)IMC010.020 | kg | ||
| 3″ (8 cm) — 18x36IMC010.023 | kg | ||
| 4″ (10 cm) — 19x45IMC010.025 | kg | ||
| 4″ thin 3.4 mm (10 cm) — 18x45IMC010.027 | kg | ||
| 5″ (12 cm) — 20x55IMC010.030 | kg | ||
| 6″ (15 cm) — 21x65IMC010.035 | kg | ||
| 8″ (20 cm) — 24x90IMC010.040 | kg |
Τεχνικά χαρακτηριστικά
| Property | Dimension / type |
|---|---|
| Raw material | Low-carbon steel, SAE 1010 |
| Nail diameter | 2,50 – 6,00 mm |
| Nail length | 40 – 200 mm |
| Head types | Countersunk |
| Head diameter | 2× the shank diameter |
| Finish | Bright |
| Packaging | 3.125 / 4 / 5 / 20 / 25 kg cartons, shrink-wrapped; 3.125 kg and 5 kg boxes in a 25 kg outer carton; big-bag options on request |
Λίστα προσφοράς