Hot-dip galvanized wire is produced by galvanizing — one of the most effective methods of corrosion protection — giving long service life while reducing the loss of material, energy and labour.
It is the preferred choice for producing barbed wire, razor wire, fence wire, chain-link (fens) mesh, straightening wire and PVC-coated wire, as well as for panel fence systems, hanging and suspended-ceiling wires, bucket handles and many industrial applications.
It is produced to the coating thickness the customer requires. Thanks to the nitrogen-wiping system at İMC’s plant, coatings of 100 – 300 g/m² and TS EN 10244-2 Class A can be achieved. Fluidized-bed and open-flame annealing furnaces deliver the required strength range.
Βασικά χαρακτηριστικά
- Hot-dip galvanized — superior corrosion resistance
- Coating 40 – 300 g/m², TS EN 10244-2 class A–D
- Wire diameter 0.80 – 5.50 mm
- Coating, strength and packaging to order
Μεγέθη που Διαθέτουμε
Τα μεγέθη που διατηρούμε σε απόθεμα. Εισάγετε ποσότητα για το μέγεθος που χρειάζεστε και προσθέστε το στη λίστα προσφοράς· τα υπόλοιπα μεγέθη κατασκευάζονται κατά παραγγελία.
Τεχνικά χαρακτηριστικά
Commercial-Quality (Standard) Galvanized Wire
| Property | Dimension / type |
|---|
| Raw material | Low-carbon steel, SAE 1006 – SAE 1008 – SAE 1010 |
| Wire diameter | 0,80 mm – 5,50 mm |
| Coating thickness | 40 – 90 gr/m2 |
| Tensile strength | 400 – 500 N/mm2 |
| % Elongation | %16 – 32 |
| Product standard | TS EN 10244-2, Class D |
| Winding direction | Clockwise |
High-Coating Galvanized Wire
| Property | Dimension / type |
|---|
| Raw material | Low-carbon steel, SAE 1006 – SAE 1008 – SAE 1010 |
| Wire diameter | 1,00 mm – 5,50 mm |
| Coating thickness | 100 – 300 gr/m2 |
| Tensile strength | 400 – 500 N/mm2 |
| % Elongation | %16 – 32 |
| Product standard | TS EN 10244-2, Class A |
| Winding direction | Clockwise |
High-Strength Galvanized Wire
| Property | Dimension / type |
|---|
| Raw material | Low-carbon steel, SAE 1006 – SAE 1008 – SAE 1010 |
| Wire diameter | 1,00 mm – 5,50 mm |
| Coating thickness | 40 – 90 gr/m2 |
| Tensile strength | 400 – 500 N/mm2 |
| Winding direction | Clockwise |
Coil (rosette) dimensions — 0.80 – 1.30 mm
| For 0.80 – 1.30 mm galvanized wire | Dimension / type |
|---|
| Inner diameter | 35 – 40 cm |
| Outer diameter | 65 – 70 cm |
Coil (rosette) dimensions — 1.40 – 5.50 mm
| For 1.40 – 5.50 mm galvanized wire | Dimension / type |
|---|
| Inner diameter | 50 – 55 cm |
| Outer diameter | 80 – 85 cm |
