Deck Sealant
Adhesives
Selsil Deck Sealant is a single-component, moisture-curing, high-strength MS-based sealing material.
Selsil Deck Filling Sealant is used to fill the gaps between the teak strips on the decks of boats, yachts and commercial ships and to preserve their elasticity. The application surface must be clean, dry, dust-free and grease-free. Before applying the product, Selsil Primer must be applied. Once the primer has dried, Selsil Deck Filling Sealant can be applied with a sealant gun. After the product is applied, it must be tooled within 25 minutes. Do not apply to frozen or wet surfaces. Avoid contact with alcohol and solvents during curing.
Warnings: Store out of reach of children. Avoid contact with eyes and skin. Wear gloves.
Βασικά Χαρακτηριστικά
- Single-component, moisture-curing
- High-strength MS-based
- Elastic filling for teak joints
- -40°C to +90°C thermal resistance
Επιλογές
Εισαγάγετε ποσότητα για την επιλογή χρώματος/μεγέθους που θέλετε και προσθέστε τη στη λίστα προσφοράς.
| Επιλογή | Ποσ. | Προσθήκη |
|---|---|---|
| 280 ml. | ||
| 600 ml. |
Τεχνικά Χαρακτηριστικά
| Product Type | Hibrit-MS polimer |
|---|---|
| Polymerisation System | Moisture Curing |
| Density | 1,40 ± 0,03 g/ml |
| Skin-over Time | 25-5dk. (23°C and 50% RH) |
| Curing Rate | Min. 2,5 mm/Gün (23°C and 50% RH) |
| Thermal Resistance | -40°C to +90°C |
| Application Temperature | 5°C to 35°C |
| Hardness | 50 ± 5 Shore A |
| Elongation at Break | %300 (ASTM D412) |
| Tensile Strength | 3 N/mm2 (ASTM D412) |