TP-EPOXY INJECTION

Epoxy-based crack injection material for structural strengthening

An epoxy-based, two-component, low-viscosity injection material developed to be injected into cracks under pressure.

Πεδία Χρήσης

• It penetrates the breaks and cracks formed in the damaged concrete, columns, beams, walls and similar structural elements into which it is injected, filling, repairing and bonding them.

Πλεονεκτήματα

• Penetrates deep into capillary cracks.
• Has high mechanical strength.
• Provides high adhesion to concrete.
• Has low viscosity; easily injected at low pressures.
• Contains no solvent.

Κατανάλωση	Varies according to the depth of the break or crack.
Διάρκεια Ζωής	Can be stored for 12 months in its unopened original packaging in a dry environment at temperatures between +5°C and +25°C. Opened packages must be used immediately.

Εφαρμογή

The cracks are widened with an angle grinder. Their interiors are cleaned out with air. The outer faces of the cleaned cracks are sealed with EPOXY REPAIR epoxy putty. After approximately 2-2.5 hours, once the packers have been mounted with the aid of a drill, TP EPOXY INJECTION injection resin is injected into the packers by means of an injection pump. Application tools: with an injection pump.

Τεχνικά Χαρακτηριστικά

KARIŞIM ORANI	A/B: 75/25 (Ağırlıkça)
KATI MADDE %	Ağırlıkça 100, Hacimce 100
VİSKOZİTE	300 - 400 mPas
KARIŞIM ÖMRÜ	60-80 Dakika / 23˚C, 200 g. (DIN 16945)
YOĞUNLUK	1,00-1,10 gr/cm³ 20°C (TS EN ISO 2811-1)
KURUMA SÜRESİ — Toz Kuruma	3-4 saat 23°C (TS 4317)
KURUMA SÜRESİ — Dokunma Kuruması	8-10 saat 23°C (TS 4317)
KURUMA SÜRESİ — Tam Kuruma	7 gün 23°C (TS 4317)
Çekme Dayanımı (N/mm²)	22 ~ 27 (DIN 53504 TS 1967)
Çekme Uzaması (%)	9 ~ 11 (DIN 53504 TS 1967)
Pull-Off (N/mm²)	3,0 ~ 3,7 (EN 1504-3)
Basınç Dayanımı (N/mm²) (1 günlük)	42 ~ 44 (EN 1504-3)
Basınç Dayanımı (N/mm²) (7 günlük)	52 ~ 57 (EN 1504-3)
Kapilar su emme ve su geçirgenliği	<0,1 kg/m². h0,5 (EN 1504-3)