TP W-08
Single-component, vapour-permeable, propylsiliconate-based, non-combustible, zero-VOC water-repellent and surface-hardening product
A single-component, non-combustible, zero-VOC water-repellent and surface-hardening product
Πεδία Χρήσης
- Fair-faced concrete, plaster, mortar
- Travertine, natural stone, brick, roof tile
- Mosaic
- Aerated concrete
- Asbestos-cement board, etc.
Πλεονεκτήματα
- High penetration depth and fast curing
- Long-lasting beading (droplet) effect
- Water-vapour permeable, colourless
- Reduces water absorption and soluble salts (for example chlorides)
- Significantly reduces the formation of white residue on treated surfaces
- Resistant to alkaline environmental conditions
Συσκευασίες & Προσφορά
20 L and 5 L
Εισαγάγετε ποσότητα για το μέγεθος συσκευασίας που χρειάζεστε και προσθέστε το στη λίστα προσφοράς σας, ώστε το αίτημά σας να δηλώνει εξαρχής την ακριβή συσκευασία.
| Συσκευασία | Ποσ. | |
|---|---|---|
| 20 Lt | ||
| 5 Lt |
| Κατανάλωση | Total theoretical consumption is 0.25-0.30 L/m². |
|---|---|
| Διάρκεια Ζωής | Can be stored for 12 months in its unopened original packaging in dry environments at temperatures between 5°C and 25°C. Opened packages must be used immediately. |
Εφαρμογή
TP W-08 must only be applied to fully cured surfaces. TP W-08 can be applied to new and old surfaces. Performance tests should be carried out 14 days after application. The application surfaces must be clean, dry and free of oils. The best performance is obtained on a dry surface. During application, the substrate temperature must be between +4°C and +40°C. Protect from rain for at least 4 hours after application. For high penetration, applying TP W-08 with low-pressure spray equipment is recommended. All equipment and containers must be clean and dry; after use they can be cleaned with water. Surfaces such as glass, wood, plastic and metal must be protected before applying TP W-08. Plants around the application area must be protected. TP W-08 should be applied protected from the effects of direct sunlight, rain and wind. In general, it is recommended to first apply the product to a small test area to check its suitability for the surface and its consumption. Application tools: roller, brush or spray.
Τεχνικά Χαρακτηριστικά
| RENK | Sarımtırak Şeffaf |
|---|---|
| SU BAZLI | VOC Free |
| DEPOLAMA ISISI | +5°C ile +30°C arasında |
Επικοινωνήστε μαζί μας για τιμή & προσφορά
Προσθέστε τα προϊόντα και τις συσκευασίες που χρειάζεστε στη λίστα προσφοράς ή επικοινωνήστε απευθείας μαζί μας.