Stone and Brick Adhesive Gel Foam
Sealants & Silicones
Selfoam Stone and Brick Adhesive Foam is a polyurethane-based, single-component adhesive foam that cures with atmospheric moisture. With its gel technology, it is specially designed to bond construction materials such as brick, stone and concrete strongly.
Shear Strength: 10-15 N/mm² (SEL DM 113)
The application surface must be clean, dry, dust-free and grease-free. Surfaces should be lightly moistened. The can should be used at 20-25°C, and if cold, kept at room temperature for 20 minutes. Shake 30 times before use. The can must be used in a vertical position and applied only on horizontal surfaces. The amount of gel foam can be adjusted with the trigger. After application, bonding is achieved by pressing the surfaces together.
Uncured foam can be cleaned with Selsil Foam Cleaner. Cured foam can only be cleaned mechanically.
12 months when stored between +5°C and +30°C.
Key features
- Polyurethane-based gel foam
- Strong bond for stone, brick, concrete
- Shear strength 10-15 N/mm²
- Initial grab in 15 min
Technical Specifications
| Property | Result |
|---|---|
| Chemical Structure | Polyurethane |
| Curing Mechanism | Atmospheric Moisture |
| Skin-over Time | 2–3 min (SEL DM 61) |
| Full Curing | 48 h |
| Initial Grab Time | 15 min |
| Adjustment Time | ≤ 2 min |
| Shear Strength | 10–15 N/mm² (SEL DM 113) |
| Application Temperature | +5 °C to +30 °C |
| Heat Resistance (cured) | -30 °C to +80 °C |
| Colour | Yellow |
| Packaging | 750 ml x 12’li koli |
| Shelf Life | 12 ay (+5°C to +30°C) |