Zinc Spray for Protecting Metal Surfaces
Technical Sprays
Selsil Zinc Spray protects all metal surfaces against corrosion and rust. It forms a micro-fine, fast-drying and adhering protective layer and is resistant up to +300 °C.
Instructions for use: Clean the surfaces with Cleaner Spray and degrease them. Before use, shake the spray can thoroughly until the ball inside the can is clearly heard. At room temperature (approximately +20 °C), spray evenly in a crosswise manner from a distance of about 25 cm. Initial drying occurs after about 15 minutes, and it fully hardens after 10–12 hours.
Key features
- Protects against corrosion and rust
- Resistant up to +300°C
- Fast-drying micro-fine layer
- For all metal surfaces
Technical Specifications
| Form | Solvent içeren aerosol teneke; alkid bazlı reçine |
|---|---|
| Colour | Metalik gri |
| Odour | Karakteriktik |
| Processing Temperature | 5ºC to 35ºC / ( optimum 18 ºC-25ºC ) |
| Wet Film Thickness | <20 μm |
| Dry Film Thickness | <10 μm |
| Touch-dry | <5 min |
| Full Dry | <24 hr |
Quote list