EPOXY 3D-2K-ŞEFFAF
Two-component, solvent-free, epoxy-based transparent coating material
A solvent-free, epoxy-based transparent coating material. It is a coating with good penetration properties, resistance to chemicals and high mechanical strength.
Areas of Use
- Shopping centres
- Schools, hospitals, the pharmaceutical sector, the food sector
- Laboratories
- In car parks, shops and similar areas
- Can be applied in 3D applications, on its own as a varnish, or with decorative coloured quartz as a terrazzo coating
Advantages
- Durable and long-lasting
- Excellent final-coating performance
- Excellent abrasion and chemical resistance.
- A thick-build coating with easy application.
- Good adhesion to epoxy primers and polyurethane coatings (provides an excellent topcoat)
- Fast curing, hygienic and easy to clean.
- Can be applied indoors and outdoors.
Packages & Quote
16 kg + 4 kg set
Enter a quantity for the package size you need and add it to your quote list, so your request states the exact package up front.
| Package | Qty | |
|---|---|---|
| 16 kg + 4 kg set |
| Consumption | Total theoretical consumption: 1.60 kg/m² per 1 mm thickness |
|---|---|
| Shelf Life | Can be stored for 6 months in its unopened original packaging in a dry environment at temperatures between 5°C and 25°C. Opened packages must be used immediately. |
Application
Weak sections of the surfaces to be coated must be removed by milling, sand blasting or sanding. If the surface is very smooth, it should likewise be roughened by milling or sand blasting to increase the specific surface area. Any oil on the surface must be burned off, and dirt and dust removed by vacuum. After a primer has been applied to the cleaned surfaces, the solvent-free transparent epoxy coating is spread over the surface with a notched trowel at the consumption rate appropriate to the desired thickness. Gas bubbles are carefully popped with the aid of a torch and the coating is left to cure. Application tools: roller or brush.
Technical Properties
| Number of components | 2 |
|---|---|
| Density (mix) | 1,00 - 1,10 gr/cm³ 20°C (TS EN ISO 2811-1) |
| Viscosity | 300-500 mPas |
| Solids content of mix (%) | 100 by weight, 100 by volume |
| Thinner | Not to be thinned |
| Mixing ratio | A/B: 68/32; 80/20 (by weight) |
| Pot life | 30-40 minutes / 23°C, 200 g (DIN 16945) |
| Application method | Roller, brush |
| Consumption | 1.1 kg per m² per 1 mm thickness, depending on the surface |
| Drying time — dust dry | 3-4 hours at 23°C (TS 4317) |
| Drying time — touch dry | 8-10 hours at 23°C (TS 4317) |
| Drying time — full cure | 7 days at 23°C (TS 4317) |
| Tensile strength (N/mm²) | 20 ~ 24 (DIN 53504 TS 1967) |
| Tensile elongation (%) | 1,8 - 2,0 (DIN 53504 TS 1967) |
| E-modulus (N/mm²) | 20 ~ 24 (DIN 52371 TS 985) |
| Flexural strength (N/mm²) | 0,5 (DIN 52371 TS 985) |
| Chemical resistance — Sulphuric acid (H₂SO₄) 10% | 3-2 |
| Chemical resistance — Sulphuric acid (H₂SO₄) 20% | 3-2 |
| Chemical resistance — Hydrochloric acid (HCl) 10% | 3-2 |
| Chemical resistance — Hydrochloric acid (HCl) 20% | 3-2 |
| Chemical resistance — Nitric acid (HNO₃) 10% | 3-2 |
| Chemical resistance — Nitric acid (HNO₃) 20% | 3-2 |
| Chemical resistance — Acetic acid (CH₃COOH) 10% | 3-2 |
| Chemical resistance — Acetic acid (CH₃COOH) 20% | 2 |
| Chemical resistance — Lactic acid 10% | 2 |
| Chemical resistance — Lactic acid 20% | 2-1 |
| Chemical resistance — Formic acid (HCOOH) 10% | 2 |
| Chemical resistance — Formic acid (HCOOH) 20% | 2-1 |
| Chemical resistance — Kerosene | 2 |
| Chemical resistance — Ethyl alcohol | 2 |
| Chemical resistance — Solvents | 2 |
| Chemical resistance — Chromic acid (H₂CrO₄) 10% | 2 |
| Chemical resistance — Sodium hydroxide (NaOH) | 3 |
| Chemical resistance — Rating scale | 3: Very resistant, 2: Resistant, 1: Not resistant |
Contact us for pricing & a quote
Add the products and packages you need to the quote list, or contact us directly.