PUR 1000-1K
Single-component, polyurethane-based, transparent waterproofing material
A single-component, polyurethane-based liquid material. It cures with atmospheric humidity. It bonds integrally and seamlessly to the entire surface, forming a transparent film. Moreover, being 100% aliphatic, it does not yellow when exposed to direct sunlight.
Areas of Use
- Glazed tiles and ceramics
- Cotto, natural stone
- Pressed brick
- Glass, glass block
- Concrete, plasters and screed
- Mosaic, mosaic tiles
- PVC, aluminium and wooden joinery
- Used on GRP, PVC and polycarbonate roof sheets.
Advantages
- Easy to apply.
- Since the applied area has no joints, water leakage is completely prevented.
- Highly flexible.
- Cures quickly.
- Resistant to standing water and freezing.
- Even if damaged in any way, the damaged section can be easily repaired in a short time.
- UV resistant.
- Has crack-bridging capability.
- Resistant to cold; the film retains its elasticity down to -30°C.
- Provides effective resistance to chemicals.
- Excellent mechanical properties with high elongation, tensile, tear and abrasion resistance.
Packages & Quote
1 - 5 - 20 kg
Enter a quantity for the package size you need and add it to your quote list, so your request states the exact package up front.
| Package | Qty | |
|---|---|---|
| 1 kg | ||
| 5 kg | ||
| 20 kg |
| Consumption | Total theoretical consumption is 0.30-0.40 kg/m². |
|---|---|
| Shelf Life | Can be stored for 12 months in its unopened original packaging, in dry conditions at temperatures between +5°C and +25°C. Opened packages must be used immediately. |
Application
Surface preparation: The surfaces to be coated must be completely dry. Do not apply on damp or wet surfaces, or in areas in constant contact with water. Surfaces must be clean, sound, load-bearing and free of loose particles. Layers that reduce adhesion, such as oil, grease, dirt, paint, cement laitance, rust, formwork oil and salt efflorescence, must be completely removed before application. Points to note: Do not apply at temperatures below +5°C, or when the temperature is expected to drop below +5°C within 24 hours of application. Do not apply on damp, wet, frozen or dirty/oily surfaces.
Technical Properties
| Appearance | Transparent liquid |
|---|---|
| Viscosity | < 200 cP (23oC) (ASTM 2196) |
| Density | 1,05 g/cm3 (23oC) (ISO 2811) |
| Solids content | 50 % (ISO 3251) |
| Elongation at break | >20 % (ASTM D 412) |
| Max. tensile strength | 15 N/mm2 |
Contact us for pricing & a quote
Add the products and packages you need to the quote list, or contact us directly.