PUR POOL-2K
Two-component, aliphatic, polyurethane-based, elastic waterproofing material
An aliphatic polyurethane resin based, highly UV-resistant, two-component, semi-gloss waterproofing material that is resistant to chemicals, impact and abrasion, easy to clean and hygienic.
Areas of Use
- Pool waterproofing
- Water distribution channels
- Ornamental pools
Advantages
- High bond strength after initial and final drying.
- Never loses its elasticity.
- Adheres to metal, stone, wood and concrete surfaces, providing a good coating.
- UV resistant.
Packages & Quote
16 + 4 kg set, 4 + 1 kg set
Enter a quantity for the package size you need and add it to your quote list, so your request states the exact package up front.
| Package | Qty | |
|---|---|---|
| 16 + 4 kg set | ||
| 4 + 1 kg set |
| Consumption | Total theoretical consumption is 0.4-0.5 kg/m². |
|---|---|
| Shelf Life | Can be stored for 12 months in its unopened original packaging, in dry conditions at temperatures between 5°C and 25°C. Opened packages must be used immediately. |
Application
During application of PUR POOL-2K waterproofing material, the substrate must be clean, dry, free of oil, and joint repairs of ceramic surfaces must have been completed. A primer must first be applied to the substrate. When choosing the primer, it must be determined whether the substrate is exposed to moisture. EPOXY PRIMER W should be preferred. After priming is finished and the substrate has dried, application of the insulation material can begin. The product must be mixed thoroughly before use and worked well into the substrate with a roller or brush. Although initial drying takes place within 4 hours, full drying occurs after 12 hours. Drying time may vary depending on temperature and humidity. Full chemical resistance is attained after 7 days. The waiting time between coats must not exceed 12 hours.
Technical Properties
| Gloss | Gloss, in RAL colours |
|---|---|
| Density | 1.30 - 1.40 g/ml (depending on colour) |
| Solids content (%) | 75 ± 2 by weight (depending on colour), 65 ± 2 by volume (depending on colour) |
| Application thinner | Acrylic thinner |
| Hardener ratio | 80:20 by weight |
| Pot life | 6-8 hours / 20°C, 200 g |
| Application method | Roller, air spray, airless spray, dipping, electrostatic |
| Coverage | 11-12 m² / kg (at 50 µ dry film thickness) |
| Application viscosity | 18-25 sn/DINCUP4/20°C |
| Drying time | Dust dry: 20 min at 20°C, touch dry: 60 min at 20°C, assembly dry: 8 hours at 20°C |
| Flash point | > 21°C |
Contact us for pricing & a quote
Add the products and packages you need to the quote list, or contact us directly.