PUR TOP COAT-T
Two-component, aliphatic, polyurethane-based, UV-resistant top coat
A two-component, polyurethane-based liquid material. It cures with atmospheric moisture. It adheres integrally and seamlessly to the entire surface, forming a transparent film.
Areas of Use
- Surfaces requiring high abrasion resistance
- Areas with heavy pedestrian traffic
- Stadiums, open-air car parks
- Indoor and outdoor applications
- Tiles such as marble and ceramic
- Natural stones
- Roofs, terraces, verandas and balconies
- Industrial floors
- As a protective top coat on polyurethane systems and polyurea waterproofing systems
- As a top coat on epoxy and polyurethane floor coatings
- On the above-water deck sections of ships
Advantages
- Bonds strongly and integrally to almost every type of surface.
- Highly hydrophobic.
- High resistance to natural influences.
- Retains its elasticity down to -40°C.
- Excellent heat and UV resistance; does not yellow, peel or soften up to 80°C.
- Superior resistance to chemicals and mechanical stress (high tensile and abrasion strength).
Packages & Quote
16 kg + 4 kg
Enter a quantity for the package size you need and add it to your quote list, so your request states the exact package up front.
| Package | Qty | |
|---|---|---|
| 16 kg + 4 kg set |
| Consumption | Total theoretical consumption is 0.1-25 kg/m². |
|---|---|
| Shelf Life | Can be stored for 12 months in its unopened original packaging in dry environments at temperatures between 5°C and 25°C. Opened packages must be used immediately. |
Application
PUR TOP COAT-T Transparent is poured onto the primed surface and applied in at least two coats with a roller or brush until the entire surface is covered. The waiting time between coats must not exceed 48 hours. After application, the tools used must be cleaned within 2 hours. Application tools: roller or brush, spray.
Technical Properties
| Gloss | Gloss, transparent |
|---|---|
| Density | 1,20 - 1,30 gr/ml |
| Solids content of mixture (%) | 71 ± 2 by weight; 63 ± 2 by volume |
| Application thinner | Acrylic thinner (if deemed necessary) |
| Hardener ratio | By weight: 75:25 |
| Pot life | 30-50 minutes / 20°C, 200 g |
| Application method | Roller, air spray, airless spray, dipping, electrostatic |
| Consumption | 11-12 m²/kg (at 50 µ dry film thickness) |
| Application viscosity | 18-25 s / DIN Cup 4 / 20°C |
| Drying time | Dust dry: 20 min at 20°C; touch dry: 60 min at 20°C; assembly dry: 8 hours at 20°C |
| Flash point | > 21°C |
Contact us for pricing & a quote
Add the products and packages you need to the quote list, or contact us directly.